Control Panel: Add/Remove Dial Up Networking & Network Components (Recommended for Advanced Computer Users only) Make sure that Proxy Watch/Global Safe are disabled (if you are using them) before removing the Leave it alone. Setting Up Your Dial-Up to UCSF Fresno Connection From Windows 95 Section 1: Configuring your Modem Make sure the modem is properly installed as per the instructions provided by the manufacturer. In the Dial-Up Networking window, choose Make New Connection. his comment is here
If you are sure the modem is properly working, proceed to Section 2. 1) Click on the Start button, scroll up to Settings then open Control Panel. Restart the computer after the dial-up adapter and TCP/IP are reinstalled. If you need to dial any special codes (such as to disable call waiting or to get an outside line) enter the code before the phone number, followed by a comma, Enter your password in the Password blank. http://www.plix.com/support/setup/dialup-98.asp
c. Check under the Modem icon in the Control Panel and make sure the Transmit and Receive buffers are turned up completely. Step 6: Set the dial-up properties (Windows ME only) The process for setting the dial-up properties varies slightly according to your operating system. Configuring & Checking the Network Section of Control Panel Always check the Network section of the Control Panel when configuring or troubleshooting a dial-up network connection.
The next time you log on, you may do so a little more quickly, and your machine may perform better as you browse the web. Figure: The Server Type dialog with the PPP Connection selected Make sure that the Log on to network option is not checked in the Advanced options: area. At this time you can proceed to the installation of the next item below if needed or click on the "OK" button in the Network dialog box and follow the prompts From the dialog box that appears you can choose the number of times you would like your dial up sessions to attempt connection.
In the Add/Remove Programs Properties window, single click on the Windows Setup folder tab. Install Dial-Up Networking Press the Start button, select Settings and then Control Panel. Then click the TCP/IP button, Choose the "Server assigned IP address" option the choose the "Specify name sever address" option then enter the Primary and Secondary DNS for Comcation. http://www.westernet.net/dialsupt.html You'll get the Server Types dialog box.
Enter username>02345678 Enter password> e. A dialog box will appear saying Connected to IMS. In newer versions, this window is automatically minimized and a dial-up status icon that looks like two little green monitors appears in the status tray in the lower righthand portion of You can do a temporary change from here but it will revert to the old setting next time that you try to connect.
Click on either "TCP/IP" or "TCP/IP --> Dial-up Adapter", whichever one is listed. Control Panel: Modems Section & Device Manager (Recommended for Advanced Computer Users only) You generally want to do your modem configuration in the Dial Up Networking properties. You can use the Device Manager to add/remove modems and/or update a modem driver. Sometimes your name will end up in the user id box.
j. http://transcoderesearch.com/dial-up/free-dial-up.html g. l. Step 3: Setting the Dial-Up Properties Select your newly-created connection icon, press the right mouse button and choose Properties...
Click OK to close the Server Types window. Set the speed to 57600. For a 14.4 Kbps modem, set the maximum speed to 57,600. http://transcoderesearch.com/dial-up/dial-up-on-2-comps.html Double-click the Make New Connection icon to get to the Make New Connection Wizard.
Now you must configure your modem options, so click on the Configure… button. Windows 95 will attempt to install the needed drivers, so make sure you've got your installation disks or CD handy! You will see the window below.
m. Once connected, you will need to open your Web browser (like Internet Explorer or Netscape) or your Email program (like Outlook Express or Eudora). Once Windows has completed copying the necessary files, you will be prompted to reboot. Go to the Network section of Control Panel to make sure that the dial-up adapter and TCP/IP are installed.
before the area code if you have call waiting on your line. Left click once on the word "Properties" to open the dialer properties dialog box. Also, you can try inserting
Scroll through the list of Network Protocols and click TCP/IP. d. Right click on UCSF 2) Click on the Server Types tab. If it is grayed out, reboot the computer and check it again.
Select the Maximum speed in bits per second for the port being used for your PPP session. h. Fill in the primary DNS "126.96.36.199" there is no alternet. Advanced TAB. 7) Click on the OK button and then click on the OK button to confirm your network configuration.
Double-click the Make New Connection icon. Figure 29. This will let your modem adjust as the connection needs. You're now connected to the 'Net!
Select the Windows Setup tab, then click on the Communications option and press Details.... In the User Name field, enter a capital P followed by your username. After a few rings, Comcation's host machine will answer. Please select the appropriate section (either Windows 95, Windows 98, or Windows ME) from the three below.
From the Select Network Adapters window, select Microsoft from the list of manufacturers. A terminal window will appear once a connection has been established. f. A terminal window will display a welcome message. (Note: If there is no text in the window, you are probably connecting to an older 28.8 FIRN dial-up number.