Would this be my hard drive. Thanks for the info. I knew some of the terms, but it took a few minutes to learn what they were and then followed the clear steps to install, config and run the two drive A quick format is ok if you have a brand new hard drive, or you want to reinstall Windows, but not if you're disposing of the disk or giving it to http://transcoderesearch.com/hard-drive/format-hard-drive-windows-xp-without-cd.html
Installing SATA drives is much simpler than installing IDE hard drives because SATA drives don't have any master and slave jumper settings to fiddle with. And/or can I use one SCSI drive and one EDI drive on this computer? (it does have the hook ups for both types of drives. If you don't have a major start up Problem it might be better to just clean out all the sludge. my photos take up all my space and this would help alot.
The power supply of the enclosure that is, not the drive. Drives last longer when they stay nice and cool. At first I had difficulty when it got to the part about creating a partition, but I somehow worked through it after a few tries.
I do know to back up the registry before I start in case I mess something up (haven't yet) but I would really appreciate some more help in what in the So I need to get the boot files onto the SSD. It does the same with all three settings. How To Install A Hard Drive In A Laptop If your system drive is SCSI or SATA, this is where to tell your PC about it.Note that it takes a while after you press F6 for the PC to stop
emails appreciated Reply CHaz from Moscow on November 1, 2007 at 7:54 pm I have been trying to install a drive and my computer says CHange from stand alone to master. How To Format A Hard Drive From Bios This may take a while depending on your machine. I do not, however, have a long enough power cable for the new HD. navigate here I owe you one.
A few notes on backup: There are a number of methods and programs available for backing up data. How To Install A Second Hard Drive It worked, thank you! If you have lost your Restore CD?s or never received any and your computer does not have a restore partition, you can usually order a set of Restore CD?s from the Thanks for your time Reply Mitch on August 17, 2007 at 3:58 am Thanks alot, THE BEST step by step tutorial that I have found.
It's a common practice on HDD market. http://www.dummies.com/computers/operating-systems/windows-7/how-to-install-a-sata-drive-in-a-windows-7-desktop-computer/ I have to start at "start windows normally" and then tries to boot further but then blue screens and says disc drive is not configured properly. How To Format A New Hard Drive Windows 10 If your system begins to give you problems after the installation, simply restore your previous back up and your system is restored to the state in was in before the installation. Install New Hard Drive Windows 7 However, the instructions are the same if you're using a non-Plugable dock.Why do I need to do this?
key to recreate the partition. have a peek at these guys What about if you have a IDE hard drive and you upgraded it with a SATA adapter? i want to format it… thanx Reply Tim on January 1, 2009 at 2:16 pm All the Bickering that I read in the begging of this is absolutly POINTLESS!!!! Thank you so much for this information… I was going in to my computer and to no avail didnt see the second hard drive. How To Connect Sata Hard Drive To Motherboard
Delete Logical DOSDrive(s) in the extended DOS Partition. 4. Once there I can verify that all the information they gave me on their products match what I downloaded drivers for, do not want to make matters worse by uploading the Your question here will get buried.You may want to post your issue in the Computer Help forum: http://reviews.cnet.com/5204-6122-0.html?forumID=44 or any of these forums which best fits your needs: http://reviews.cnet.com/4520-7600_7-5565323-1.htmlWe have many check over here I prefer to send all of my data across the network at my house to another computer. 3) Have you written down all the things that you will need to remember?
Windows starts numbering drives at zero (which is the C drive), so your new disk probably shows up as Disk 1 or 2. 9Select the MBR (master boot record) partition style How To Connect Hard Drive To Motherboard Read the partition posts, and figure I would need to "ghost" the OS, or would a clean install be better and ghost the rest of the programs? Now it should prompt you to ask if you want to format this partition using NTFS.Say yes.
Flag Permalink This was helpful (0) Collapse - Working in the registry by IrisRose / February 25, 2005 1:59 AM PST In reply to: Forget Something? Four years old. In enthusiast-class cases, it’s becoming more common to see the drive’s connectors facing the right side, making it easier to route and hide cables behind the motherboard tray. Sata Interface Cable If this is the case.
You constantly get a message that space on drive c is dangerously low, which it is. Do I need to change this,to another value? So now I have three SATA drives. this content I set the CD/DVD drive as the default drive thinking I would be able to just install Windows OS from there, but the system keeps requesting a boot disk.
Its simple:BECAUSE THE PEOPLE WHO DO KNOW WHAT IT MEANS WON'T NEED A GUIDE TO HELP THEM.Therefore, the people who don't know DO need a guide, but this guide is USELESS Since we're working with a drive that contains no data, it should be listed as "Unallocated" space. All Rights Reserved. This includes any online updates.
At a high-level, the partition will need to be configured as Primary and Active, and contain the appropriate system files - though the specifics beyond that vary quite a bit based Reply Jakey on October 2, 2007 at 11:08 am I have no experience whatsoever and didnt even know the difference bewteen the cables but you have saved me 50.00 possibly more As far as I know, XP is still on there but I can't access it through Fdisk.Please help. It is extremely important that you have backed up all the data that you want to bring back to your computer.
I’m pretty certain that my data is intact and that the problem is ‘sector migration’ where the sectors have simply migrated beyond the drive’s error correction limits. Download and save to CD all updated drivers and software for your Video Card, printers, scanners and any other hardware that you plan to use. If this article is too hard for you to understand, then perhaps you should look for another article somewhere else or wizen yourself up a little and come back for more.It's If you're on Windows 8.1, you will be 'refreshed' to Window 8.
Read More . Once all of that is done, then insert Bootable XP disk and from the instructions I will see it will give me options to either "REPAIR An existing partition", "DELTE EXSISTING Passwords for programs, phone numbers (for dial-up users), internet favorites.